top of page
Karl-Ernst_fortec_Edges

  OUR OFFER  

PUMPS

PFI_8400_C
PPG_22800
FTP_BP_30T
AUWAHL PUMPEN

  • The intelligent clear water submersible pump with automatic flat suction

  • Stainless steel (housing, shaft, screws)

  • Technopolymer (impeller, diffuser)

  • Plug housing: ABS, IP65 (dust and splash-proof)

  • Check valve: Integrated with vent and

  • GEKA quick coupling

  • Extremely low residual water level <1 mm

  • Reliable monitoring and
    protection functions

  • Easy to use for everyone

  • Robust and durable design

  • Swiss precision and Quality

  • Areas of application: Flat roofs, flooded rooms, elevator and light wells , small basement shafts, construction sites, gardens, fire departments, and civil defense.

 CLEAR WATER PUMP 
SUBMERSIBLE PUMP  

Karl-Ernst_fortec_Edges
PFI-9600NR-N Klarwasserpumpe / Tauchpumpe

  PFI-9600NR-N  

  *CHF 1250.–  

Incl. tax CHF 1'351.25

Swiss Made

  • For clear and slightly contaminated water with a pH value between 4-8, max. 40 °C Slurping operation with minimal water flow, self-cooling of the motor through jacket cooling, flat suction up to 1 mm residual water, triple shaft seal, stainless steel housing, stainless steel shaft, impeller made of Noryl (technopolymer), Robust inlet strainer made of stainless steel with special diffuser made of technopolymer. With built-in temperature protection device. With GEKA quick coupling. For flat roofs, flooded rooms, and small amounts of residual water.

 CLEAR WATER PUMP  

PFI-8400C Klarwasserpumpe
Karl-Ernst_fortec_Edges

  PFI-8400C  

  *CHF 385.–  

Incl. tax CHF 416.20

Swiss Made

  • 12,600 L/hour

  • 7 m max. immersion depth

  • Temperature of the liquid to be pumped +35 °C

  • Suction height up to 1 mm above the ground

  • Continuous operation class S1​​​​

​

​

  • For clear and slightly contaminated water with a pH value between 4 and 8, max. 40 °C Slurping operation with minimal water flow, self-cooling of the motor through jacket cooling, flat suction up to 1 mm residual water, triple shaft seal, stainless steel housing, stainless steel shaft, impeller made of Noryl (technopolymer), Robust stainless steel inlet strainer with special technopolymer diffuser. With built-in temperature protection device. With GEKA quick coupling. For flat roofs, flooded rooms and small amounts of residual water.

 CLEAR WATER PUMP 

PFI-10800C Clear Water Pump
Karl-Ernst_fortec_Edges

  PFI-10800C  

  *CHF 425.–  

Swiss Made

Incl. tax  CHF 459.45

  • 10,200 L/hour

  • 7 m max. immersion depth

  • Temperature of the pumped liquid +35 °C

  • Suction height up to 5 mm above the floor

  • With float switch

​

For clear and slightly contaminated water with a pH value between 4–8, max. 40 °C, suction operation at minimal water flow, motor self-cooling via jacket circulation. Suitable for confined spaces, footprint only 190 × 150 mm. Flat suction down to 5 mm residual water (in monitored hand-held operation), triple shaft sealing, housing made of stainless steel, stainless steel shaft.
Impeller made of Noryl (technical polymer). With built-in temperature protection device. With GEKA quick coupling. Suitable for mobile or stationary use in flooded rooms, narrow shafts, drains, etc.

 CLEAR WATER PUMP 

​

Karl-Ernst_fortec_Edges

  PKI-8600C  

  *CHF 320.–  

Swiss Made
PKI-8600C Klarwasserpumpe

Incl. tax CHF 345.90

  • 10,200 L/hour

  • 7 m max. immersion depth

  • Temperature of the liquid to be pumped +35 °C

  • Suction height up to 5 mm above the ground

  • Magnetic float switch with switch for automatic and manual mode

​

​

  • For clear and slightly contaminated water with a pH value between 4-8, max. 40 °C, slurping operation with minimal water flow, self-cooling of the motor through jacket cooling. Suitable for confined spaces, space requirement only 190x150 mm. Flat suction up to 5 mm residual water (in monitored manual mode), triple shaft seal, stainless steel housing, stainless steel shaft

  • Impeller made of Noryl (technopolymer). With built-in temperature protection device. With GEKA quick coupling. For mobile or stationary use in flooded rooms, narrow shafts, drainage systems, etc.

CLEAR WATER PUMP

Karl-Ernst_fortec_Edges

  PKI-8600M  

  *CHF 375.–  

Swiss Made
PKI-8600M Klarwasserpumpe

Incl. tax CHF 405.40

  • 33,000 L/hour

  • 8 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • Suction height up to 1 mm above the ground

  • Automatic flat suction with timer

  • With electronic, adjustable level sensor

​

​

​

  • This pump is suitable for pumping dirty water and sewage in private and commercial applications. It is ideal for pumping dirty water, sewage, surface water, and water mixed with sludge. This pump is characterized by its reliability, which works best under automatic operating conditions in stationary installations.

WASTE WATER PUMP

Karl-Ernst_fortec_Edges

  FT-P/BFP33NR  

FT-P/BFP33NR Dirty water pump

  *CHF 2'599.–  

Incl. tax CHF 2'809.50

  • 19,200 L/hour

  • 5 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • Delivery head up to 14.5 meters

  • With electronic circuit breaker

  • With float switch

​

​

​

  • This pump is suitable for pumping dirty water and wastewater in private and commercial applications. It is ideal for pumping dirty water, wastewater, surface water, and water mixed with sludge. This pump is characterized by its reliability, which works best under automatic operating conditions in stationary installations.

 WASTE WATER PUMP 

FT-P/SBP19A Dirty water pump
Karl-Ernst_fortec_Edges

  FT-P/SBP19A  

  *CHF 1'320.–  

Incl. tax CHF 1'426.90

  • 30,000 L/hour

  • 5 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • Delivery head up to 11 meters

  • High delivery rate of 30,000 l/h

  • With adjustable level sensor

​

​

​

  • This pump is suitable for pumping dirty water in commercial applications, with a particle diameter of up to Ø 40 mm. It is characterized by easy installation and reliability under automatic operating conditions in fixed installations.

Karl-Ernst_fortec_Edges

  FT-P/BP30T  

FT-P/BP30T Combination dirty water pump

  *CHF 1'595.–  

 WASTE WATER PUMP COMBI 

Incl. tax CHF 1'724.20

  • 30,000 L/hour

  • 5 m max. immersion depth

  • Temperature of the pumped liquid +40 °C

  • Delivery height up to 11 meters

  • High pumping capacity of 30,000 L/h

  • With float switch

​

This pump is suitable for pumping wastewater in commercial applications, with a particle diameter of up to Ø 40 mm. It is characterized by easy installation and reliability under automatic operating conditions in fixed installations.

 SEWAGE PUMP COMBI 

Karl-Ernst_fortec_Edges

  FT-P/BP30A  

FT-P/BP30A Schmutzwasserpumpe Kombi

  *CHF 1'095.–  

Incl. tax CHF 1'183.70

  • 16,800 L/hour

  • 8 m max. immersion depth

  • Temperature of the liquid to be pumped +60 °C

  • With float switch

  • With built-in temperature protection device

​

​

  • Suitable for confined spaces in shafts, tanks, pits, etc. Pumps sludgy dirty water/wastewater and faeces with biological solids up to 32 mm. Effortlessly handles slightly acidic/alkaline wastewater with pH values between 4-10. Used in cracking plants, as oil and sludge collectors and for oil-emulsified liquids. Largely insensitive to clogging. Level control via float switch. For liquids in the temperature range up to +45 °C - briefly up to 60 °C. Motor housing made of stainless steel, pump housing and VORTEX impeller made of gray cast iron. Double-acting, oil-bath-lubricated mechanical seal made of light metal/ceramic carbon, motor shaft made of stainless steel.

WASTE WATER PUMP 

Karl-Ernst_fortec_Edges

  PSG-15000A  

PSG-15000A Dirty Water Pump

  *CHF 699.–  

Incl. tax CHF 755.60

  • 21,600 L/hour

  • Designed for 24-hour operation

  • With automatic pump control

  • Solid passage up to Ø 10 mm

  • Stainless steel strainer

​

​

  • Robust problem solver for a wide range of applications. Operates continuously at water temperatures up to +60 °C. Pumps seepage water containing sludge and sand in underground garages, basements, etc. Can be used as a circulation pump in biotopes, ponds, water features, etc. that operate 24 hours a day. Handles biological solids up to 10 mm and liquids emulsified with oil. Pumps slightly acidic and alkaline warm wastewater in laundry rooms with pH values between 4 and 10. Stainless steel motor shaft. Double-acting, oil-lubricated mechanical seal made of silicon carbide/ceramic carbon. Gray cast iron housing and impeller, with stainless steel strainer.

 WASTE WATER PUMP 

PSG-16_21000
PSG-16000 Wastewater Pump
Karl-Ernst_fortec_Edges

  PSG-16000  

  *CHF 1'410.–  

Incl. tax CHF 1'524.20

  • 25,200 L/hour

  • Designed for 24-hour operation

  • With automatic pump control

  • Solid passage up to Ø 10 mm

  • Stainless steel strainer

​

​

  • Robust problem solver for a wide range of applications. Operates continuously at water temperatures up to +60 °C. Pumps seepage water containing sludge and sand in underground garages, basements, etc. Used as a circulation pump in biotopes, ponds, water features, etc. that operate 24 hours a day. Handles biological solids up to 10 mm and liquids emulsified with oil. Pumps slightly acidic and alkaline warm wastewater in laundry rooms with pH values between 4 and 10. Stainless steel motor shaft. Double-acting, oil-lubricated mechanical seal made of silicon carbide/ceramic carbon. Gray cast iron housing and impeller, with stainless steel strainer.

  WASTE WATER PUMP  

PSG-16_21000
PSG-21000 Wastewater Pump
Karl-Ernst_fortec_Edges

  PSG-21000  

  *CHF 1'730.–  

Incl. tax CHF 1'870.15

  • 27,000 L/hour

  • 8 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • Delivery head up to 12 meters

  • With float switch

​

​

  • Wastewater and sewage containing small amounts of sand and sludge. Application: Wastewater, pits, ponds with solid particles in industrial and domestic areas. For liquids in the temperature range up to +40 °C, with pH values between 4-10. Level control via float switch.

  WASTE WATER PUMP  

Karl-Ernst_fortec_Edges

  PSI-27000  

  *CHF 699.–  

PSI-27000 Wastewater pump

Incl. tax CHF 755.60

  • 30,000 L/hour

  • 8 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • Delivery head up to 14 meters

  • With float switch

​

​

  • Dirty water and wastewater with small amounts of sand and sludge. Application: Dirty water, pits, ponds with solid particles in industrial and domestic areas. For liquids in the temperature range up to +40 °C, with pH values between 4-10. Level control by means of float switch.

  WASTE WATER PUMP  

Karl-Ernst_fortec_Edges

  PSI-36000  

  *CHF 1'025.–  

PSI-36000 Wastewater pump

Incl. tax CHF 1'108.-

  • 18,000 L/hour

  • 9 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • With built-in temperature protection device

  • With float switch​

​

​

  • Wastewater and sewage containing solid organic matter and sludge, lye water, washing machines, and cesspools. Application: Wastewater, sewage, pits, ponds, tanks containing solid particles in industrial and domestic settings. For liquids in the temperature range up to 40 °C - briefly up to 60 °C, with pH values between 4-10. A minimum water level of 240 mm is required for long pumping operations. Level control by means of float switch. Motor housing, pump body, and impeller made of stainless steel. Motor shaft made of stainless steel. Double-acting, oil-lubricated mechanical seal made of Si carbide/ceramic carbon.

  WASTE WATER PUMP  

Karl-Ernst_fortec_Edges

  PPI-18000  

  *CHF 730.–  

PPI-18000 Wastewater pump

Incl. tax CHF 789.15

  • 30,000 L/hour

  • 5 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • With built-in temperature protection device

  • With float switch

​

​

  • Wastewater and sewage containing solid organic matter and sludge, lye water, washing machines, and cesspools. Application: Wastewater, sewage, pits, ponds, tanks containing solid particles in industrial and domestic settings. For liquids in the temperature range up to 40 °C - briefly up to 60 °C, with pH values between 4-10. A minimum water level of 240 mm is required for long pumping operations. Level control by means of float switch. Motor housing, pump body, and impeller made of stainless steel. Motor shaft made of stainless steel. Double-acting, oil-immersed mechanical seal made of Si carbide/ceramic carbon.

  WASTE WATER PUMP  

PPI-27000 Wastewater pump
Karl-Ernst_fortec_Edges

  PPI-27000  

  *CHF 940.–  

Incl. tax CHF 1'016.15

  • 22,800 L/hour

  • 5 m max. immersion depth

  • Motor protection switch

  • Cutting device made of special steel

  • With float switch

​

​

  • Suitable for wastewater containing solid, organic, non-abrasive fibers. Application: Sewage shafts, septic tanks, and cesspools. Cutting device made of special steel. For liquids in the temperature range up to +40 °C (104 °F) – briefly up to 60 °C (140 °F) with a pH value between 4 and 9. Level control via float switch. Housing and impeller made of cast steel, motor shaft made of stainless steel. Double-acting, oil-bath-lubricated mechanical seal made of WIDEA/ceramic carbon. ABS control box with motor protection switch, start-up and operating capacitor (reinforced start-up), start relay, and on/off switch.

  SEWAGE PUMP  

Karl-Ernst_fortec_Edges

  PPG-22800  

  *CHF 1'430.–  

PPG-22800 Fäkalienpumpe

Incl. tax CHF 1545.85

  • 30,000 L/hour

  • Delivery head up to 16 meters

  • Motor protection switch

  • Shredding device made of special steel

  • With float switch

​

​

  • Suitable for wastewater containing solid, organic but non-abrasive, cuttable fibers Application: Sewage shafts, septic tanks, and cesspools. For liquids in the temperature range up to +40 °C - briefly up to 60 °C with a pH value between 4-9. Shredding device made of special steel. Level control by means of float switch, housing and impeller made of cast steel. Stainless steel motor shaft. Double-acting, oil-bath-lubricated mechanical seal made of WIDEA/ceramic carbon, ABS switch box with motor protection switch, start-up and operating capacitor (reinforced start-up), start relay, and on/off switch.

  SEWAGE PUMP  

Karl-Ernst_fortec_Edges

  PPI-25000  

  *CHF 1'540.–  

PPI-25000 Sewage Pump
PPI_25000

Incl. tax CHF 1'664.75

  • 30,000 L/hour

  • 5 m max. immersion depth

  • Temperature of the pumped liquid +40 °C

  • For heavy-duty use

  • Suction level up to 40 mm above the floor

​

Robust, compact, jacket-cooled, and construction-site-ready pump for harsh environments. Without external float switches; all monitoring functions are securely built in with cast modules in the pump head. Cast control modules, moisture- and shock-proof installed. Pumps sludge- and sand-containing liquids. Good stability for tough, mobile use. Steel outer casing with handle. Impeller made of grey cast iron.

  SEWAGE PUMP  

​

Karl-Ernst_fortec_Edges

  FT-P/SBP30  

  *CHF 1'750.–  

FT-P/SBP30 Schmutzwasserpumpe

Incl. tax CHF 1'891.75

  • 30,000 L/hour

  • 5 m max. immersion depth

  • Temperature of the liquid to be pumped +40 °C

  • For rough use

  • Suction level up to 40 mm above floor

  • With float switch

​

​

  • Robust, compact, jacket-cooled construction pump suitable for construction sites and harsh environments. No external drag switches; all monitoring functions are safely integrated into the pump head with encapsulated modules. Encapsulated control modules, moisture- and vibration-proof installation. Pumps slurry and sand-laden liquids. Good stability for tough, mobile use. Steel outer jacket with handle. Impeller made of gray cast iron.

  WASTE WATER PUMP  

Karl-Ernst_fortec_Edges

  FT-P/SBP30A  

  *CHF 1'815.–  

FT-P/SBP30A Dirty water pump

Incl. tax CHF 1'962.-

  WELL / PRESSURE WATER PUMP  

Karl-Ernst_fortec_Edges

  FT-P/BDP5-80  

  *CHF 915.–  

FT-P/BDP5-80 Well / Pressure water pump

  • 5,700 L/hour

  • Delivery head up to 80 meters

  • With thermal motor protection

  • Liquid temperature up to +35 °C

  • Extremely efficient in the field of submersible

  • pumps​

​

​

  • Deep well pump for pumping clear water, e.g., for domestic and commercial water supply, as well as for agriculture and irrigation technology.

  • Cost savings due to excellent efficiency, as lower power consumption is achieved. With a diameter of only 3 inches, the costs for drilling a new well and installation are significantly reduced.

Incl. tax CHF 989.10

  Discover even more pumps!  

We list additional pumps on a separate website.

Pedrollo
bottom of page